Voopoo Vinci SE Pod kit is yet another starter kit in the Vinci Pod kit series, but does it offer anything new to the market? Let's find out.
Features
- Chipset: GENE Chip
- Dimensions: 93mm x 24mm x 14.1mm
- Battery: 900mAh
- Wattage Output: 11-15W
- Resistance: 0.3-3.0ohm
- Chassis Material: Aluminum-Alloy
- Firing: Draw-Activated
- Mouthpiece: Anti-Bacterial Silver Ion
- LED Battery Life Indicator Light
- Pod Series: Vinci Series V2 Pod
- Pod Capacity: 2mL
- Fill: Top Fill System with Dual Fill Ports
- Coil: Integrated 0.8ohm Mesh Coil
- Compatible: Vinci Pod, Vinci Pod Royal, Vinci Q, and Drag Nano 2
- 10s Overtime Protection
- Short-Circuit Protection
- Overcharge Protection
- Over-Discharge Protection
- Over-Temperature Protection
- Charging: Type-C Port
What is included in the box?
- 1 Vinci Pod SE device
- 1 0.8ohm Vinci V2 pod
- 1 Type-C cable
- 1 user manual
Quality and design
Voopoo has used gradient colors and patterns on each gadget, which they call a "modern minimalistic design." The Vinci Pod SE's lack of buttons is another feature that contributes to its simplistic appearance. The SE doesn't need a fire button or adjustment buttons because, like certain other Vinci pod systems, it is only a draw-activated device. The Voopoo Vinci Pod SE comes in normal size, can hold 2ml of juice, and is TPD-compliant. It comes in a lot of different colors. Cream Tan, Flame Red, Provence Purple, Midnight Black, Whale Fall Blue, Coffee Brown, Dawn Blue, and Forest Green are the colors you can choose from.
There are two small holes for airflow and a USB-type C port on each side of the device. The LED light on the front of the device is the other important part of its look. The LED lights are contained within a tiny, mirrored oval form. When the device is turned on, the LED shines through, but before that, it is entirely invisible. It's also important to note that the vape pod is small enough to fit easily in the palm of your hand. Its dimensions are 93mm by 14.14mm, making it smaller than other Vinci gadgets.
Battery
The device has a 900mAh internal battery that can be charged through Type-C USB in around 60 minutes. It uses the excellent Gene Chip, with a maximum power output of 15W.
The battery level is shown by the color of the small LED light on the front of the gadget.
- Green Light = 30-100%
- Red Light = 0% to 30%
Vinci Series V2 Pod
The Voopoo Vinci Pod kit SE cartridge with a capacity of 2ml. To make it easier to control the internal e-liquid, the body or pod of the cartridge features a sizable transparent area. The built-in 0.8Ω resistor should give a maximum power of 15W (battery charged). This 0.8 cartridge features four holes at the base, and according to VooPoo specialists, the cartridge with four holes effectively captures enough airflow from all directions to provide the user with a smooth and well-balanced taste.
The non-replaceable coil has a dual-layer silicone ring installed to minimize leaking to the bare minimum. Excess condensation is collected and recycled in the isolated compartment at the pod's bottom. The V2 pods' top-fill feature is their most important design feature. Just snap the mouthpiece off to access the fill port and air release valve. It is simple to determine when you need a refill because the juice window of the pod extends down to the coil's base. Voopoo does an excellent job of ensuring that all Vinci pods use the same pods. These pods work with the Vinci Pod, the Vinci Q, the Vinci Pod Royal Edition, and the Drag Nano 2.
How to Fill Up the Pod
- Remove the pod from the battery part.
- Move the top of the mouthpiece forward or backward to release it.
- Find the fill port on the top of the pod. Put the bottle nozzle into the fill port and slowly add e-liquid (don't overfill). Put the mouthpiece back on the pod. Add the pod to the battery section.
- Allow the e-liquid to soak into the cotton wicks for about five minutes before vaping.
Performance
When you buy a Vinci pod system, you know it will work well. The Vinci Pod SE is just as good as any other Vinci device, but that's not because of the gadget itself. Instead, it's because the V2 pods are so good.
The 0.8 pod produces excellent flavor, a smooth pull, and generous clouds for an MTL pod. Due to the lack of adjustment in the device, the draw is quite loose MTL, which is restricting for those who prefer it a little tighter. In actuality, it lies between loose MTL and very restricted DTL vaping. The Vinci Pod kit SE device does have a superb auto-draw trigger that fires almost instantaneously on the inhale. The Pod kit SE's battery is also perfect. The 900mAh lets you vape for 10 hours. Additionally, charging takes only about 60 minutes from death.
Final words
Voopoo Vinci Pod SE is a small basic kit with anti-leaking "disposable" cartridges (ITO atomization technology by VOOPOO) and a brand-new, practical top-fill system. The gadget has a GENE.TT 2.0 chip with an embedded 900mAh battery, a type-C charging connection, and an LED notification light. The only option offered for Vinci SE is an automated aspiration. However, it works effectively and responds quickly to any desire.
With the new 4 airflow cartridge, the Voopoo Vinci SE can give great Vape flavours and a fairly smooth MTL hit. By plugging one of the two holes on the body of the Mod with your finger, you can increase the Hit and get a more contrasted and profitable MTL hit simultaneously. A full tank (2ml) lasts a long time, and with a complete battery charge cycle, you can use about 4ml of e-liquid. It takes about 60 minutes to charge the battery fully. VINCI SE's design, materials, and sobriety are valuable. Check Vape price in Pakistan.