voopoo argus p1 pod Review

Voopoo Argus P1 20W Pod System Review

The Voopoo Argus P1 Pod is the newest family member of Argus pods. It has an 800mAh built-in battery and is powered by the GENE.AI 1.2 chip. The Argus Pod comes with two 2ml capacity pods, each with a 0.7 or 1.2 resistance coil integrated into the pod. The airflow can be changed, and you can charge it with a USB Type C cable.


  • Dimension: 74.6mm x 46.7mm x 17.4mm
  • Chassis Material: Zinc Alloy + PC
  • Wattage: 5-20W
  • Voltage: 3.2-4.2V
  • Resistance: 0.5-3.0ohm
  • Battery Capacity: 800mAh
  • Charging Port: USB Type-C
  • Output: Direct Voltage Based
  • Operation: Draw-Activation
  • Fill System: Side-Fill - Silicone Stopper
  • Pod Material: PCTG
  • Pod Capacity: 2mL
  • Magnetic Pod Connection
  • Adjustable Airflow Control Switch
Voopoo Argus P1 20W

Include in box

  • VOOPOO Argus P1 Pod System
  • 7 Ohm VOOPOO Argus Pod Cartridge
  • 2 Ohm VOOPOO Argus Pod Cartridge
  • Type-C USB cable
  • Fashionable Lanyard

Voopoo Argus P1 box includes

Design and quality

The Argus P1 is a small, square pod system that can easily carry in your pocket. It looks great with a metal plate covering the body and a clear case that lets you see the chip inside. There's also an airflow adjustment slider to use the included pods for restricted DTL and MTL vaping.

The Voopoo Argus P1's lightweight, sleek design is unobtrusive and fashionable. The device is half made of a strong zinc alloy and half transparent PC, and it combines quality manufacturing with bold style. Voopoo's rounded corners make for a more comfortable grip, and we appreciate that. A gold-plated bar protrudes through the top of the device on one side of the transparent section; this is a reinforced lanyard loop. On the side of the P1 made of metal, there is also a USB-C port for fast Charging, which charges quickly. There are no buttons on the device; inhale to fire. The four LEDs used to show the battery charge are visible through the transparent section of the body and remain on for a couple of seconds after you stop inhaling. You can also remove and replace the pod to check the battery level, which is a useful feature.

Argus P1 Design

Argus P1 pods

The Voopoo Argus P1 replacement pods that already have mesh coils (0.7ohm and 1.2ohm). That lets us switch between MTL vaping and RDL vaping whenever we want. Both pods can hold 2ml of e-liquid.

Refilling is simple: remove the silicone plug over the fill port before refilling with your favorite e-juice. Top fill is the best option because the pod cartridge doesn't have to be removed each time it needs to be refilled.

Argus P1 pod cartridge has full-viewing capabilities, there's no need to remove the pod to see how much Vape flavour is left - you can see at a glance if it's time to refill. Even better, the magnetic connection makes the pod easy to put in and take out of the device.

Argus P1 with 0.7ohm and 1.2ohm Pods


The Voopoo Argus P1 is equipped with an advanced GENE AI 1.2 chipset with good battery-saving capabilities. The chip can change the output wattage automatically and cleverly after analyzing each user's puff pattern and coil used. We need to understand how this works, but it does. When we change the way we vape, the vapour produced varies.

Voopoo Argus also has several built-in safety protections, such as low battery, overcharge, short-circuit, overtime, chip over-temperature, and output under protections.

The Voopoo Argus P1 has a few manual controls, like changing the wattage or the mode. However, this is typical of a pod vape product, focusing on convenience rather than customization.

Battery and Charging

One of the best things about this kit is that it charges quickly. It comes with a Type-C charging cable, and its powerful 800mAh battery can be charged from empty to full in about 25 minutes, thanks to the high charging rate.


The Voopoo ARGUS P1 pod kit works extremely well. The device is easy to use and does its job perfectly. The auto-draw trigger is easy to use, and the power from the pods is almost instantaneous.

The ARGUS pods, on the other hand, are the real stars of this kit. Like the ARGUS Pod device, these newly designed pods provide an excellent vaping experience. The 0.7 Coils pod produces a warm and flavorful vape with plenty of clouds. The 0.7 pods are used in both MTL and restricted DTL setups. When it comes to MTL, the 1.2 argus p1 replacement pods are great. The vape is slightly cooler than the 0.7 pods, but it still has the same flavour and is easier to draw on. The P1 device has no buttons or settings, which is fine for people who want a device that is easy to use.

Final words

The Voopoo Argus P1 is a great choice if you want a small, easy-to-use vape you can take with you and use anywhere. This stylish kit is cheap and easy to use, making it a great choice for vapers just starting. However, it has a lot to offer more experienced vapers, thanks to its high-quality performance.

The 0.7 and 1.2 resistance Argus P1 replacement pods have great taste and a smooth draw. The P1's airflow adjustment helps with this and lets you do both tight DTL vaping and tight MTL vaping.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.