The Geekvape T200, the AEGIS Touch, is the newest and most powerful vape. It has 200 watts of power, which is a lot. This is one of the 22 Aegis types that Geekvape has, and it's the biggest one with the biggest screen. The Geekvape T200 distinguishes itself from other vape mods by featuring a 2.4-inch intelligent touchscreen that covers the full front of the device. The Geek Vape T200 Aegis Touch Starter Kit requires two external 18650 lithium-ion batteries to operate. This device is interesting, so keep reading to find out more about it and what Geekvape has to offer.
Geek Vape Aegis T200 Touch Screen Starter Kit Specifications
- AS Chip 3.0
- Dimensions: 141.25mm by 56.05mm by 31.12mm
- Wattage Output: 5-200W
- Voltage Output: 12V
- Resistance Range: 0.1-2.0ohm
- Temperature Range: 100°-315°C / 200°-600°F
- Power Mode
- Temperature Control Suite
- Smart Mode
- Bypass Mode
- IP68 Rating
- Zinc-Alloy Chassis Construction
- Intuitive Firing Button
- Screen: 2.4" TFT Touch Screen
- Charging: USB Type-C Port
- Silver, Black, Blackish Green, Navy Blue, Claret Red, Azure Blue, and Rainbow are all available
What is Included In the box
- One Aegis T200 Box Mod
- One Coil Tool
- One 5.5mL Z Tank 2021 Edition
- One Spare Parts Pack
- One Spare Glass
- One Type-C USB Cable.
- One 0.4ohm Z Coil
- One 0.15ohm Z Coil
Quality and design
The Geek Vape T200 Aegis has a remarkable sense of quality when held. The atomizer can have a slightly bigger diameter, but the edge of the deck has a slanted silicone seal. A moving button under the Aegis Touch T200 opens the battery door. The surface is made more robust with thick rubber, preventing it from getting scratched.
The door has no lateral play after it has been opened. It keeps the batteries in place well. The polarity orientation is marked, and the box is protected if the batteries are inserted incorrectly. o achieves excellent sealing, the access to the battery compartment is strengthened with many layers. This IP68 protection does, however, come with degassing holes. The power for the box comes from two 18650 batteries.
On the other side, the brand name is written just above a switch. This small button is now a standard part of all Geekvape boxes. It's very useful when you're using the box on the go. You don't have to change settings or press a certain combination of buttons to lock or open your Geek Vape T200 Aegis Touch Starter Kit. It only takes a second. Easy to understand and use. A stitched leather-like material covers the box's back. It is thick and seems well-made, and it fits perfectly in the palm of your hand.
Pod (Geekvape Z Sub-Ohm Tank)
It has a sub-ohm tank called the Z, which is very similar to other sub-ohm tanks. It is also important to note that this tank model has been a reliable companion for Geekvape's Aegis box mods, including the Aegis X and Legend 2. Won't repurchase it if you've already had it.
The tank is more comprehensive in the center and narrower on the ends to allow for a proper gasket seal. It is a big tank that can hold up to 5.5 mL of e-juice. At the bottom of the tank is a 510 plug that screws into the body (unlike pod mods, which use magnets). You may twist the airflow system on the tank's top to modify the amount of air flowing through it. You may access two fill openings for the tank by unscrewing the top cap above. And finally, the mouthpiece on top of the Vape pod is wide open for enjoyable DTL draws.
Battery and charging
The Geek Vape T200 Aegi needs two 18650 lithium-ion batteries. On the bottom of the device, a slider button can be pulled toward the screen to open the door to the battery area. You must press quite hard to lock the battery door while pulling the button down.
You can use an external battery charger made for lithium-ion batteries to charge your 18650 cells or the Type-C charging port on the right side of the device. Just make sure you use a charger that can handle at least 3V.
Function
You often use the touchscreen and "fire" buttons to handle the Geekvape T200. Five quick presses of the fire button on the right side of the device can turn the vape on or off.
Here is a list of the details shown on the OLED screen, going from top to bottom and left to right:
- Battery Life: The top-left of the OLED screen shows the amount of battery life left in the left battery.
- Locked or Unlocked
- Mode: the current Mode, shown in red letters
- Watt: Large white letters show the current power (or temperature)
- Length of Puff - has a cool circular motion
- Amps - the Temperature
- Ohms - coil resistance
- Volts - the voltage
If the device is locked (the bar on the left is in the down position), you can't use the screen, and the fire button won't work. You'll still need to slide right on the screen to begin utilizing other gestures once the slider is in the unlocked position (up). No matter what Mode you use, you can change the power by scrolling to increase or decrease the wattage by 1W.
Swipe right or left to go through the Modes. Here are the six choices for Mode:
- SMART mode finds the ideal power settings to keep the coil from burning
- POWER mode lets you choose any wattage between 5 and 200 watts
- TC-SS modes allow you to set a specified temperature for a stainless-steel coil
- TC-TCR modes set a specified temperature for any coil type
- VPC: variable power curve
- BYPASS: gives power based on how much battery life is left and how hard the coil is to move.
You can adjust the device's Theme, Wallpaper, and Brightness, Reset it, and Clear the Puffs, and Version from the SETTING menu.
Performance
Geek Vape T200 Aegis strikes like a truck. Every puff is solid and bold, building up to big clouds of smoke. You can choose the best power source from 5 to 200 watts. The DTL draw is always smooth with the wide opening and new Z series coils. You can prime your hit for optimal comfort despite no auto-draw sensor. The vape mod has a 0.15-ohm coil that works between 70 and 85 watts and hits well. You can switch it out for a 0.4-ohm coil with a lower 50-60-watt power. Excellent flavour delivery with the T200, with solid flavour on the inhale and exhale. It would be too much for a beginner to use this device, but it is ideal for cloud chasers and other seasoned vapers.
Depending on how you adjust the airflow, either Geek Vape T200 Aegis coil can provide a direct lung or a restricted direct lung pull. To obtain better battery life from this mod, you can utilize the 0.4 coils and lower wattage needs, which could be a factor in choosing which coil to use. However, the 0.15 coil is the best option if vape flavours are your only priority. It's an excellent option for a massive vapour cloud because it's accurate and leak-free.
Conclusion
The Geek Vape T200 Aegis Touch Starter Kit has numerous excellent features. It has a beautiful design, IP68 water and dust resistance, and good drop resistance, and it provides great performance and vape flavours. Aegis Touch mod is beautiful and sturdy. With its reliable performance and constant power output, it delivers just what you would want from a top-tier vape mod. It is modern and attractive, and it works well. It is a good kit that differs a little from the others. Check vape price in Pakistan and purchase this vape device.