Vaporesso Gen PT60

Vaporesso Gen PT60 kit Review


Vaporesso sent us their newest Gen series product, a pair of Pod mods called the Gen PT60/80. They use their new x Tank system, which is made for direct lung vapers. This Vaporesso Gen PT60 has the standard up/down and fire buttons and a USB C charging port. It also has a small but apparent 0.91" OLED screen that shows the wattage, battery life, resistance, and puff count.

Specification of GEN PT60

  • Dimensions: 112 x 35 x 28mm
  • Built-in 2500mAh battery
  • Output Power: 5-60W
  • Charging: USB Type C, DC 5V/2A
  • Screen size: 0.91" OLED

Build & Design Quality

The PT60 is a small Pod Kit that looks like a box. Both devices are small and easy to carry. The battery fits perfectly, and there's a lovely magnetic door on the back of the device for accessing the battery.

They have a great feel in the hand and are ribbed for grip. However, your hand-feel pleasure.  There are six colours to choose from. Since each colour covers the whole body, each one stands out in its way. All of them are silver, and the top of the xTANK is also made of silver metal. But the top of the xTANK for all the other colours is black.

The device has three buttons: an "up" button below the screen and a "fire" button on the top front, above the screen. The electric signal to make vapour comes from a fire button on the front. The different modes are shown on the black-and-white screen just below. There are two small buttons for setting things up. A USB-C port is also on the front for quick charging or updating the electronics. Everything works well together, and there are no annoying clicks.

Vaporesso Gen PT60 kit

Battery section

This device has a 2500mAh battery and can only go up to 60W. Many 18650 batteries made for vapes today have a capacity of between 2000 and 2500 mAh.

When using the GTX Mesh 0.2ohm coil at 50W, the battery did drain a little faster than when using the 0.4ohm coil.

This kit takes 45 min to an hour to charge with a USB C cable. The Gen PT60 can put out up to 60W. One look reveals the information. The menus are typical of the Gen generation and have enough options for all vapers. Most users will be happy with the variable wattage mode or the smart mode, which adjusts the power to the coil used.

X tank

The tank is transparent all the way through. It is easy to see how much e-liquid is left in the cartridge without taking it out.

Unlike the Gen PT80S pod, the power of the two coils is better adapted to the maximum capacity of the pod. There are two mesh GTX coils. The first is a 0.4-ohm coil that can be used with 26 to 32W of power, and the second is a 0.2-ohm coil that can be used with 45 to 60W of power. The flavours are true to life and well-made. You can change how tight the draw is by turning the airflow ring. The draw is still direct to the lung. Even though the nicotine level is low, the hit is excellent.

There are a few holes under the pod that let the air out. This safety feature adds to the built-in safety systems in case the battery goes bad. The battery life is also listed: as 2500 mAh, which is in line with the size of the pod. But that doesn't mean you won't need to charge your Gen PT60 if you only use it with the 0.2-ohm coil. The coating on the battery's body has tiny grooves that aren't too noticeable but are enough to give a good grip.

Overall performance of GEN PT60

GTX Mesh coils are also used in the GEN PT60, and this kit comes with both the 0.2ohm and 0.4ohm coils. This setup works best with e-liquids that are high in VG. Inhales are warm, intense, and full of flavour. Thus these coils bring out the best in any flavour you choose to vape.

The vapour production is just as good, and as someone who usually uses MTL setups. The coils in the Vaporesso X Tank Pods are very easy to put in. All you have to do is push them into the tank's base until they sit flush.

Filling the tank is just as easy. Furthermore, all you have to do is turn the ring that controls the airflow to expose a rubber seal that covers a fill port.

There are so many ways to inhale when it comes to controlling the flow of air. This tank can be used for tight MTL, and loose DTL draws, so it has something for everyone.

GEN PT60 Kit package includes

  • One VAPORESSO GEN PT60 battery
  • One VAPORESSO tank Pod (4.5ml)
  • One GTX 0.2 MESH Coil (45-60W)
  • One GTX 0.4 MESH Coil (26-32W)
  • One Type-C cable
  • One user guide
  • Warranty Card (one)
Vaporesso Gen PT60 kit box

GEN PT60 kit Contains

  • Well-made construction.
  • Very light and easy to carry in your pocket.
  • Devices that are simple but stylish.
  • Six colours to choose.
  • Simple to use.
  • Pods are held on tight.
  • Able to do a lot (4.5 mL).
  • Makes use of an existing, well-proven coil line (GTX line).
  • Good choices for coils depending on the type of device.
  • Charge rate gets a good score (1.83-1.87A).
  • Vaping through a tube.

Final words

VAPORESSO did an excellent job with these latest devices as a whole. Even though it has great flavour and cloud production, doesn't leak. And it has a double-top system that screams convenience, the thing that impresses me the most is how light it is.

It has to be one of the lightest pod kits I've ever used, and it's also easy to use. It feels great in your hand and won't take up too much space in your pants or shirt pocket. Due to its size and weight, user likes the PT60 for a beginner's DL device

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.