Vaporesso GEN PT80 S

Vaporesso GEN PT80 S Review

pToday, we'll take a closer look at the newest member of the Vaporesso Gen Family.  The Vaporesso Gen PT80 S is explicitly designed for DTL vapers. Its double-top system and SSS leak-proof technology can give you a better taste and a more immersive vaping experience.

It comes in a range of subtle colours and finishes that give off a sense of quality and sophistication.

GEN PT80 S Review

Vaporesso GEN PT80 S specifications

Dimensions: 132 x 30 x 29mm

Size of the tank: 2ml (TPD Compliant)

One 18650 battery (not included)

Power Output: 5 to 80W

DC 5V/2A USB C for charging

OLED Screen Size: 0.91"

gen-pt80s-specification

Vaporesso GEN PT80 S kit Box includes

  • 1 Vaporesso Gen PT80S Mod
  • 1 Vaporesso X Tank Pod
  • 1 GTX Mesh Coil 0.3 Ohm
  • 1 GTX Mesh Coil 0.15 Ohm
  • 1 Additional glass tube
  • 3 Spare O-Ring
  • 1 USB-C Cable for Charging
  • 1 User Manual

Vaporesso GEN PT80 S kit includes

Vaporesso GEN PT80 S body design and quality

The ergonomics of Vaporesso Gen PT80 S are the most remarkable feature. It's the best way to vape while on the go. It is heavy and round, and its design has no metal. This makes it look very simple. But appearances are deceiving. It is impact-resistant and sturdy. The Mod is easier to hold because it has a grip on the back. Changing the coils on the Mod is easy because it has a magnetic cartridge.

The front of the pod has a 0.91-inch OLED screen that is easy to read and shows all the information you need to use it. When you press the fire button three times, the "+" and "-" buttons can no longer be used. The display will flip if you hold down the fire button and the plus button for one second.

A type C USB port is used to charge the pod, which is becoming more common in models on the market. But if you use a battery that isn't built in, you can charge it with a separate charger, which is highly recommended. The box part of the Gen PT80 S works with a battery in the 18650 formats.

gen-pt60-pt80s-design

The Mod Part of Vaporesso Gen PT80S

The Vaporesso Gen PT80S runs on a single 18650 battery, which necessitates the use of a battery door. It can be taken off by pulling it away from the main body of the Mod. Like the pod, it is held in place by magnets.

The battery compartment door is sturdy and resistant to finger pressure.  It's simple to remove from the Mod by holding the panel etching. Furthermore, there is a fingernail recess for those with less dexterity.

Insert a 18650 battery, positive down, and negative up. In case you're not sure, the battery tray is marked. After the device is installed, it starts on its own and shows us this screen.

It's a black-and-white OLED display, which some might think is a little outdated, but it does the job. The power output is clear and easy to read, but it will be hard to see in the sun.

Above the 0.91-inch screen, the fire button is clickable and responsive, and below are the up and down menu buttons. The type C USB charging port is at the bottom so that you can charge it anywhere.

Gen-PT-80-Vaporesso

Mod's Function

Vaporesso Gen PT80S device is turned on or off with five quick presses of the fire button.

  • To lock or unlock the gadget, press the fire button three times. Even when lock mode is on, you can still vape.
  • Hold down the fire button and the up menu button to change the screen's orientation.
  • Press and hold fire and down menu buttons to reset the puff counter.
  • Press the up and down buttons simultaneously to get to the mode selection screen.
  • Press the up or down button to change the wattage or voltage up or down.

You can choose between Variable Wattage (VW), Variable Voltage (VV), Smart Wattage, system default, and exit on the mode select screen.

The Pod X tank

The X tank pod is a new kind of cartridge for the Gen PT 80 S. The brand promises new anti-leak technology and a double top system that puts the air intake and filling holes at the top of the atomizer. During our tests, there were no leaks that we could see.

To fill the 4.5ml tank, turn the top ring to get to the silicone seal. The two airflow holes on the cartridge only let you vape directly into your lung, and you can't take a very airy draw either.

The X tank pod is made to work with all GTX coils from 0.15 ohms to 1.2 ohms. Though the 1.2-ohm coils are meant for mouth-to-lung vaping. The pod comes with two coils: one with 0.3 ohms and one with 0.15 ohms.

Vaporesso also says that these coils have a new part called the "morph mesh structure." This makes a dense vape taste precisely like the liquids we tried. The cotton in the coil is fluffier so that it can soak up more of the e-liquid and last longer.

During our tests, we found that the 0.3-ohm coil gives off a better taste and makes vaping more enjoyable. The lower 0.15-ohm coil tends to heat the Mod and creates the too-hot vapour for the cartridge airflow.

How to fill the pod

The GTX line of mesh coils needs to be plugged in. Just push one up into the pod and make sure that the O rings make a good seal.

  • To fill the pod, turn the top cap counterclockwise until you can see the silicone seal.
  • Lift the seal and carefully pour e-liquid into the fill chamber, making sure not to overfill and that the wicking ports are fully submerged in juice.
  • Give the juice five minutes to soak into the cotton before you vape.

Gen-PT80S-filling-the-xtank-pod

What kind of job does the Vaporesso GEN PT80 S do?

The Vaporesso Gen PT80S has three main modes you can switch between by pressing and holding the up and down buttons simultaneously.

First is "VW," which stands for "variable wattage." Next is "VV," which stands for "variable voltage,". And finally, "SW," which stands for "smart variable wattage." Smart variable wattage means that, depending on which coil you use. The device will choose the right amount of wattage on its own.

The 0.15 and 0.3 options come with the kit. The GEN PT80 S works excellently with the GTX mesh coils.  Higher VG e-liquids work well with sub-ohm coils, and you can also expect a good amount of vapour. The fill port is cleverly hidden behind the airflow control ring, revealing a small rubber gasket that fits most e-liquid bottle tops. This makes it easy to fill the pod and gives it a new look. If you keep turning the airflow ring, you'll be able to choose the best way to inhale.

Final thought

The Vaporesso Gen PT80 S is light because it only weighs 70g. It's the perfect way to get started with direct-to-lung vaping, or if you're looking for an e-cigarette, that's easy to hold and comes in many sizes.

Even though it has excellent taste and cloud production, doesn't leak, and has a double-top system that screams convenience, the thing that impresses me the most is how light it is. It has to be one of the pod kits that weighs the least. It feels great in your hand and doesn't take up much space in your pants or shirt pocket. Both Vaporesso Gen PT80 S and Vaporesso Gen PT60 is Available at Vapemall website and Stores.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.