Vaporesso Moti X Mini Review

Vaporesso Moti X Mini Pod Kit Review

Naturally, VAPORESSO doesn't require an introduction. It invented the most popular vaping devices on the market, including the XROS Nano, Target 200 and others.

The Vaporesso Xros Moti X Mini is a compact, user-friendly pod device that can fire up to 29W and adjust your coil's wattage automatically. It is designed to be a "mini cloud canon" with variable airflow. It has a built-in 1150mAh battery that is recharged using Type-C charging and a honeycomb MESH coil.

Design and build quality

People are drawn to the X Mini because it is an exciting device. The X MINI might catch your attention even though the colour scheme. The device's base, which glows blue when you smoke, is the most apparent attention-getter. The colour possibilities are evident on the tank casing and the "X" in the branding.

The X MINI has a domed-shaped tank with a 6.5 mm ID to the tip and measurements of 25.4 mm x 72.3 mm. Its overall size is comparable to a 18350 mech mod with a tiny RDA or something similar. It provides a unique and safe hand feel with approximately 54 grams of weight and a capsule design. Additionally, polycarbonate is helpful because it has an easily graspable small tack.

The transparent outer covering reveals the internals and circuitry, which look fantastic. The branding is futuristic and complements the device in a sophisticated way. The magnetic tank housing and airflow intake, which consists of two sizable airflow slots, is the matte-gray aluminum ring at the top. Even though the magnets are potent, the tank sat inside with too much lateral wiggle area. If the device is dropped, the tank might come out. However, this is mainly because the battery weighs more than the tank.

Vaporesso Xros Moti X Mini

Batteries Section

The kit's transparency makes poly carbon material handy. Its polish can also resist daily wear. The upper third is spray-coated aluminum alloy, reducing weight. Its 26mm circumference makes the battery pocketable. Plenty of airflows come from the dual 10mm fixed airflow ports. Battery bases have type C USB charging ports. The flattened pod kit won't stand vertically for long. Two gold-plated, spring-loaded coil contacts are visible inside the battery. A magnetic ring ensures good pod contact.

The quiet orange fire button connects the alloy and PC. It doesn't light. The bright blue battery-base LED does that. Let's discuss this blue LED's many safety precautions.

Battery section moti X mini


  • Long blue light—atomizer working
  • Three blue flashes: No pod detected/high resistance
  • Low resistance/short circuit protection—blue light flashes once.
  • Long blue light (half brightness)—low battery
  • Overheat protection—blue light flashes eight times.
  • 10 blue flashes—Over vape protection
  • Flashing blue light - Charging

The LED stops flashing when ultimately charged. The standard five clicks turn the device on or off.

Coils & Pod

Hold on, people. The majority of my criticism comes from this area. The X Mini employs a powerful PCTG pod with a 2ml E-Liquid capacity that is magnetically kept in place. The pod have Vaporesso Xros Moti X Mini Replacement Coils. Thus it should only be necessary to replace the pod itself if it develops cracks, leaks, or loses the ability to hold its coil firmly in place.

Fill Port

The pod includes a reliable bottom-fill port securely sealed off by a substantial rubber stopper. The X Mini fill port is excellent because with no leaks and minimal condensation underneath the pod. Usually, vape pods with this type of fill port tend to leak.


How to fill the pod

Pushing the X35 mesh coil into the pod is all that is required because it is plug-and-play. There is no correct way to do this, but you must ensure that it is firmly seated.

  • Pull the silicone stopper from the pod and swing it out of the way of the aperture.
  • Squeeze the e-liquid gently into the pod chamber, careful not to overfill it.
  • Replace the plug into the pod, making sure it fits snugly.
  • Insert the pod into the battery area and wait five minutes for the e-liquid to soak into the cotton.
  • The side of the pod includes a mark indicating the minimum fill level. There should be no problems as long as the juice doesn't get below the wicking ports.


A little cloud cannon. With its small and stylish form, the Vaporesso Moti X Mini Pod Kit provides a practical and straightforward route for new vapers to obtain an authentic and smooth DTL vaping experience. You don't need to bother about the coil or wattage setting when using; for my device, I chose the refillable pod and filled it with my preferred high VG e-liquid. You must first insert the coil into the pod to use it. After that, fill the pod with your favorite e-liquid and begin vaping.

The pod and the gadget work together to manage airflow, and the pod has a magnetic connection to the device. When a pod is inserted into the device, you can rotate the pod to change the air intake for a looser or tighter inhale. Specifically, you can change the airflow to achieve a tight MTL, and a loose DTL vaping.

The fire button's purpose is relatively straightforward:


  • Press the fire button five times to turn it on/off;
  • Activation: to vape, hit the fire button;

Who should purchase a Vaporesso Moti X Mini?

The X Mini is perfect for anyone wishing to transition to sub-ohm vaping using higher-VG E-Liquids like shortfalls—especially if this is your first experience vaping sub-ohm. Sub-ohm vaping is significantly more accessible with the X Mini since you never have to worry about menus, settings, or pressing the wrong button by accident. It an excellent option for anyone searching for a cheap sub-ohm vape.


Last words

A new AIO produced by MOTI and VAPORESSO is called the X MINI. It's a tiny, futuristic-looking AIO with a partially translucent body and the main circuit board. If you could have imagined it 12 years ago, it would resemble a vape from 2022.

The X MINI is designed for users with restricted airways and direct lung (DL) vaping, despite its compact size and customizable airflow.

The X MINI is an AIO once more. It accepts replacement coil heads with a honeycomb mesh heating element rated at 0.35 ohm and has a capacity of 4 mL (with TPD optional 2 mL). The device has a powerful 1150 mAh battery and can produce up to 29 watts of self-regulating electricity. Moreover, it supports native Type-C pass-through charging.


Back to blog

Leave a comment

Please note, comments need to be approved before they are published.